- Prepare your surface using soap & water. Dry thoroughly.
- Run a credit card or similar plastic edge over the transfer tape applied to the front of the vinyl.
- Slowly lift the transfer tape & vinyl design away from the backing, exposing the sticky side of the vinyl. If it does not come off cleanly, repeat step 2 and try again.
- Position the transfer tape & vinyl design over the surface you wish to apply it to and press it on; careful to avoid wrinkles.
- Run the plastic card over to transfer the design from the transfer tape to the surface you are applying it to.
- Slowly lift the transfer tape away, the design will remain behind. If the design remains stuck to the transfer tape, repeat step 5.